Harlequin WoodSpring


Woodspring


Harlequin WoodSpring is a permanently installed sprung floor system that is a modern update of the traditional ‘basket weave’ construction originated in the 19th Century. Harlequin’s modern interpretation blends a traditional construction approach with the technology of today’s materials. The “spring” in basket weave construction comes from the natural flexing and recovery of the triple layer of battens, which is enhanced by shock-absorbent elastomer pads.

Harlequin WoodSpring is comprised of a triple layer of wooden bearers laid at right angles to one another onto shock-absorbent elastomer pads attached to the underside of the bottom layer. The bearers are then covered with a dual layer of semi-flexible panels and covered with either a Harlequin vinyl performance surface or solid hardwood. The selection of lumber, batten and pad spacing, insulation and installation are proprietary to Harlequin Floors and critical to long-term performance.

Harlequin WoodSpring must be installed through Harlequin’s Contracts division.


SELECTION OF CUSTOMERS
  • Ballet Austin
  • Ballet Hispanico
  • Bolshoi Ballet
  • Mark Morris Dance Group
  • Pittsburgh Ballet Theatre
  • Princeton University
  • Royal Caribbean Cruise LInes
  • Royal Opera House
  • Steps on Broadway
  • University of Arizona
  • USC Glorya Kaufman School of Dance

APPLICATIONS

Harlequin WoodSpring is only available for installation by our Contracts Division and each custom installation is backed by a Harlequin guarantee. WoodSpring can be installed with a Harlequin vinyl performance surface or an approved hardwood surface.

Recommended Surface Options for Harlequin WoodSpring:

  • Harlequin Vinyl Performance Surface
    • Cascade
    • Fiesta
    • FreeStyle
    • Marine
    • Standfast
    • Studio
    • Studio B
  • Approved Hardwood Surface

SPECIFICATION GUIDE
Permanent or Portable Permanent
Finish Harlequin Vinyl Performance Surface or Approved Hardwood
Top Panel 3/8" (0.375") semi-flexible panels
Lower Panel 1/2" (0.5") flooring grade plywood
Top Panel
(Hardwood Requirement Only)
3/4" (0.75") flooring grade plywood
Basketweave 3 layer counterbattens
Resilient Pads 3/8"(0.375") Elastomer, proprietary density
Fastenings and Adhesives Panels are bonded with a non-setting adhesive and mechanically attached.
Testing Standards DIN 18032-2
Average Shock Absorption
(Min. 53%)
64%
Vertical Deformation
(Min. 2.3mm)
3.3mm
Area Deflection
(Max 15%)
14.9%
Rolling Load
(Min. 1500 N)
>1500 N


Request a Quote